ORION 26-520 GALAXY PREMIUM BODY FILLER – 3 LITER – Custom Fineline Tape & Art Supplies

September 30,2024

26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints. Blue cream hardener included. The Substrates: Galaxy 26-520 Premium Body Filler can be applied to: Steel Galvanized Stee.

26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints.

Blue cream hardener included.

The Substrates: Galaxy 26-520 Premium Body Filler can be applied to:

Steel

Galvanized Steel

Aluminum

Fiberglass

SMC

The Prep:

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing.

Keep the repair area small. Use 80 grit to remove the paint and featheredge.

The Mixing:

Stir the filler before using. Knead the cream hardener.

Measure hardener 2% by weight (add a ribbon of cream hardener from edge

to edge across the center of a 4” diameter puddle).

Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.

Approximate setting time is 3-5 minutes @ 72°F

The Application:

Apply in layers with even firm pressure.

Do not apply all at once.

The Finish:

Sand body filler with 80 grit sandpaper.

Finish sand body filler with 180 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches.

The Fine Print:

Never return mixed filler to can

Keep can closed and store in a cool dry place, Use with cream hardener only.

.
26-520 PREMIUM BODY FILLER has excellent adhesion to galvanized steel and aluminum. Can be used for cosmetic fiberglass and composite repairs. Stain resistant for use with basecoat/clearcoat paints. Blue cream hardener included. The Substrates: Galaxy 26-520 Premium Body Filler can be applied to: Steel Galvanized Steel Aluminum Fiberglass SMC The Prep: Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge. The Mixing: Stir the filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle). Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 3-5 minutes @ 72°F The Application: Apply in layers with even firm pressure. Do not apply all at once. The Finish: Sand body filler with 80 grit sandpaper. Finish sand body filler with 180 grit. Sand bare metal and featheredge with 180 grit to remove 80 grit scratches. The Fine Print: Never return mixed filler to can Keep can closed and store in a cool dry place, Use with cream hardener only.

TUSA SPORT, Accessories

Aumeo 16G 20G Nose Rings Retainer Segment Continuous Ring Flexible Bioflex Lip Tragus Cartilage Helix Daith Lobe Earrings Piercing Retainer Kit for Work Surgery : Clothing, Shoes & Jewelry

F702A-1TK - Safire Transitional Floor Mount Tub Filler Trim Kit with H – Artos US

Elgin Silicone Replacement Ear Tips - Elgin® USA

F203-6 Quarto Waterfall Shower Head – Artos US

Built by ABS Plastic and Chrome Plated Shine Finish Universal Fits Most 10 Holes 11 1/4 Bolt Circle for 20 22-1/2 and 24-1/2 Wheels Full Kits

XIUHUA ABS Chrome Plastic Front and Rear Axle Cover Full Kits with 33mm Thread-On Flange Nut Covers and Removable Center Cap (Flat Top)

Rwraps™ Orion's Belt Vinyl Wrap